You will be redirected to XBee Pro 900 Wire Antenna in a few seconds.

Home :: Wireless :: ZigBee & 802.15.4 :: XBee Pro 900 Wire Antenna

XBee Pro 900 Wire Antenna

XBee Pro 900 Wire Antenna
 
(0 reviews)  

The XBee-PRO 900 RF module is ideally suited for low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, the XBee-900 is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application.

As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digi’s Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands.

XBee-PRO modules operate within the ISM 900 MHz frequency band. The modules are optimized for use in US and Canada.

Digi Part #: XBP09-DPWIT-156

Note: Some users have found that the XBee-PRO 900 cannot be used with the XBee Explorer Regulated. A work around that many users have found is to bypass diode D1 on the Explorer.

Note: Due to manufacturer’s restrictions in other countries, we can only ship these to the USA and Canada. Sorry world!

Features:

  • 3.3V @ 210mA
  • Fast 156 Kbps RF data rate
  • 50 mW (+17 dBm) power output
  • Point-to-multipoint networking ideal for low-latency applications
  • Support for large, dense networks
  • 128-bit AES encryption
  • ISM 900 MHz operating frequency
  • Wire antenna
  • Industrial temperature rating (-40° C to +85° C)
  • Advanced mesh networking and low-power modes supported
  • Approved for use in the United States and Canada

Documents:

SKU WRL-09097
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 0.37 oz
 
Price: $42.95
Qty Out of stock
: *
: *
: *
 
 
 
XBee Pro 50mW RPSMA - Series 2 (ZigBee Mesh)
 
JLCC-44 to DIP-44 SMT Adapter (50 mils / 1.27 mm pitch)
 
QFN-28 to DIP-32 SMT Adapter (0.45 mm pitch, 4.0 x 4.0 mm body, 2.4 x 2.4 mm pad
$44.95
 
$13.99
 
$8.99
 
 
 
QFN-32 to DIP-36 SMT Adapter (0.65 mm pitch, 6.0 x 6.0 mm body)
 
Servo Hub - Standard (Futaba Standard)
 
Battery Holder 4xAA with Cover and Switch
$9.99
 
$4.99
 
$1.95
 
 
 
Purpletooth Jamboree - BC127 Development Board
 
Shaft Collar - Clamp (1/4", 2 Pack)
 
Hitec HS-5055MG Digital Servo
$64.95
 
$5.95
 
$17.99
There have been no reviews


Gift certificates