You will be redirected to XBee Pro 900 U.FL Connection in a few seconds.

Home :: Wireless :: ZigBee & 802.15.4 :: XBee Pro 900 U.FL Connection

XBee Pro 900 U.FL Connection

XBee Pro 900 U.FL Connection
 
(0 reviews)  

The XBee-PRO 900 RF module is ideally suited for low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, the XBee-900 is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application.

As a member of the XBee family of RF products, the module is easy-to-use, shares a common footprint, and leverages Digi’s Drop-in Networking solutions including gateways and adapters. No configuration is necessary for out-of-the-box RF communications. The module’s default configuration supports a wide range of data system applications. Advanced configurations can be implemented using simple serial AT commands.

XBee-PRO modules operate within the ISM 900 MHz frequency band. The modules are optimized for use in US and Canada.

Digi Part #: XBP09-DPUIT-156

Note: Some users have found that the XBee-PRO 900 cannot be used with the XBee Explorer Regulated. A work around that many users have found is to bypass diode D1 on the Explorer.

Note: Due to manufacturer’s restrictions in other countries, we can only ship these to the USA and Canada. Sorry world!

Features:

  • 3.3V @ 210mA
  • Fast 156 Kbps RF data rate
  • 50 mW (+17 dBm) power output
  • Up to 6 miles (10 km) RF LOS with high gain antennas
  • Point-to-multipoint networking ideal for low-latency applications
  • Support for large, dense networks
  • 128-bit AES encryption
  • ISM 900 MHz operating frequency
  • U.FL connector
  • Industrial temperature rating (-40° C to +85° C)
  • Advanced mesh networking and low-power modes supported
  • Approved for use in the United States and Canada
  • External Antenna Required

Documents:

SKU WRL-09098
Stock Out of Stock
Ships No Date Available.
Weight 0.35 oz
 
Price: $42.95
Qty Out of stock
: *
: *
: *
 
 
 
SOIC-32 (1.27 mm pitch) Stainless Steel Stencil
 
TSSOP-38 (0.5 mm pitch) Stainless Steel Stencil
 
DFN-4 to DIP-4 SMT Adapter (0.5 mm pitch, 1.3 x 1.5 mm body)
$10.99
 
$10.99
 
$3.49
 
 
 
Arduino Workshop
 
Tubing - Aluminum (5/8"OD x 8.0"L x 0.569"ID)
 
Hub Spacer - 1"
$21.95
 
$3.79
 
$1.99
 
 
 
Micro Gearmotor - 130 RPM (6-12V)
 
Servo Extension - CAT6 (non-boosted)
 
Header - 2x23-pin Male (PTH, 0.1")
$12.95
 
$7.99
 
$0.95
There have been no reviews


Gift certificates