You will be redirected to Thermoelectric Cooler - 40x40mm in a few seconds.

Home :: Components :: General :: Thermoelectric Cooler - 40x40mm

Thermoelectric Cooler - 40x40mm

Thermoelectric Cooler - 40x40mm
(0 reviews)  

Description: Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. The Thermal Tape listed below works very well to attach heat sinks to the hot side.

This Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or other block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it.


  • 40 x 40 x 3.6mm
  • lmax – 7A
  • Umax – 15.4V
  • Qcmax – 62.2W
  • Tmax – 69C
  • 1.7 Ohm resistance
  • 127 thermocouples


SKU COM-10080
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 1.89 oz
Price: $14.95
Qty Out of stock
: *
: *
: *
Omron Snap Action Switch
Jumper Wire Kit
RS232 Shifter SMD
Interface Cable for EM401 and EM406
Flex Sensor 2.2"
ATmega328 with Arduino Optiboot (Uno)
Silicone Bumpers - Large (10x16.5mm, 4 pack)
Zumo Robot Kit for Arduino (No Motors)
Arduino Display Module - 4.3" Touchscreen LCD
There have been no reviews

Gift certificates