You will be redirected to Teensy++ 2.0 in a few seconds.

Teensy++ 2.0

Teensy++ 2.0
(0 reviews)  

Description: The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1" spaced headers so you can hook up a load of peripherals.

The Teensy++ comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program the Teensy in your favorite IDE using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

Note: This does not come with a USB cable, please check below for an appropriate one.

Dimensions:  2" x 0.7" (50.8 x 17.8 mm)


  • 8-Bit AVR Processor (AT90USB1286)
  • 128K Flash Memory, 8K RAM, 4K EEPROM
  • USB Can Emulate Any Type of Device
  • Single Pushbutton Programming
  • Arduino Compatible
  • 8 Analog Inputs
  • 46 Digital I/O Pins
  • 9 PWM outputs
  • SPI and I2C


SKU DEV-11781
Stock 183 In Stock
Ships Today
Weight 1.11 oz
Price: $24.95
Add to wish list
: *
: *
: *
74HC238 - 3 to 8 Line Decoder
LilyPad FTDI Basic Breakout - 5V
Hobby Knife Replacement Blades
Spring Terminals - PCB Mount (3-pin, right-angle)
Copernicus II DIP Module
Tube - Stainless (1"OD x 8.0"L x 0.88"ID)
Pro Micro - 3.3V/8MHz
LCD Bezel - 3.2" (White)
Flexible Speaker and Amplifier - 13x18cm
There have been no reviews

Gift certificates