You will be redirected to Simon Says - Through-Hole Soldering Kit in a few seconds.

Home :: Kits :: Simon Says - Through-Hole Soldering Kit

Simon Says - Through-Hole Soldering Kit

Simon Says - Through-Hole Soldering Kit
 
(0 reviews)  

Description: This is the latest version of our popular through-hole Simon Says Kit. We've made some changes to the board that should make it easier than ever for the beginner to build! All components are through-hole, making this kit a great place to start when you're learning to solder. When building this kit, you'll have a chance to solder a 28-pin microprocessor, LEDs, battery clips and more.

After you have successfully assembled the kit, you will have a greater knowledge of through-hole soldering and the tools, techniques, and terminology required to populate your own PCB prototype. You will have a development platform with 5 outputs (LEDs and buzzer), 5 inputs (buttons), and serial for debugging. And, of course, you'll have your very own Simon game!

Checkout the assembly instructions – we're pretty proud of them. The kit even includes batteries! Assembly time varies, but for a true beginner with no soldering experience, the kit can take 20-40 minutes to assemble.

Note: This ATmega328 comes pre-programmed with the Simon code as well as the STK500 serial bootloader. This serial bootloader will allow you to re-program the Simon game using the Arduino development environment. There is not direct support under the Arduino IDE but the 'Lilypad Arduino w/ ATmega328' should allow you to reprogram the board using Arduino. You can also use a standard text editor and WinAVR. The serial port on this board requires a male header and FTDI Basic board, not included, but related below.

Kit Includes:

  • 1x ATmega328 – pre-programmed with Simon firmware
  • 1x Buzzer
  • 2x 0.1μF Cap
  • 1x 10K Resistor
  • 4x LEDs (blue, yellow, red, green)
  • 2x Slide Switch
  • 4x Battery Clips
  • 2x AA Batteries
  • 1x Button pad
  • 1x Bezel
  • 4x Standoffs and screws
  • 1x Assembly instructions

A soldering iron and wire cutters are the bare minimum tools required. We scoured the earth and found a really fantastic beginner's soldering iron for $10, solder for $2, and wire cutters for $2.

Note: The video below was made using the older version of out Simon kit, so there are a few components that won't be in the same place as in your kit, but the parts are still the same so the video should still be helpful.


 

Documents:

Replaces: KIT-09883

SKU KIT-10547
Stock 1 In Stock
Ships Today
Weight 11.19 oz
 
Price: $24.95
Qty
Add to wish list
: *
: *
: *
 
 
 
USB Cable Extension - 6 Foot
 
JTAG USB OCD Tiny - Programmer/Debugger for ARM processors
 
Microswitch - 3-terminal
$3.95
 
$51.95
 
$1.50
 
 
 
Zener Diode - 12V 500mW
 
USB Weatherproof Connector - Panel Mount (USB B)
 
Serial Miniature OLED Module - 1.5" (OLED-128-G2-GFX)
$0.49
 
$14.95
 
$49.95
 
 
 
LLP-12 to DIP-12 SMT Adapter (0.4 mm pitch, 3 x 3 mm body)
 
DFN-14 to DIP-18 SMT Adapter (0.5 mm pitch, 4.0 x 3.0 mm body)
 
QFN-12 (0.4 mm pitch, 2.2 x 1.4 mm body) Stainless Steel Stencil
$5.99
 
$6.49
 
$10.99
There have been no reviews


Gift certificates