You will be redirected to Serial Enabled 16x2 LCD - White on Black 5V in a few seconds.

Home :: LCDs :: Monochrome :: Serial Enabled 16x2 LCD - White on Black 5V

Serial Enabled 16x2 LCD - White on Black 5V

Serial Enabled 16x2 LCD - White on Black 5V
 
(0 reviews)  

Description: This is the latest evolution of our serial LCD. Included on a single board is a 16×2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.

This LCD makes for a great gift, because it can be used for so many different projects! For more gift ideas check out the SparkFun Gift Guide!

Features:

  • Embedded PIC 16F88 utilizes onboard UART for greater communication accuracy
  • Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
  • Operational Backspace
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off via firmware
  • User definable splash screen

Dimensions:

  • PCB: 103x36mm
  • LCD: 71.4×26.4mm

Documents:

SKU LCD-09395
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 2.80 oz
 
Price: $24.95
Qty Out of stock
: *
: *
: *
 
 
 
DIP Sockets Solder Tail - 40-Pin 0.6"
 
ATmega328 with Arduino Optiboot (Uno)
 
EL Panel - Blue (10x10cm)
$0.95
 
$5.50
 
$14.95
 
 
 
Basic 8x2 Character LCD - Black on Green 5V
 
Larson Scanner Kit - 10mm Diffused LEDs
 
LED - Basic Blue 5mm
$9.95
 
$12.95
 
$0.50
 
 
 
Header - 8-pin Female (SMD, 0.1")
 
LGA-16 to DIP-16 SMT Adapter (0.5 mm pitch, 3 x 3 mm body)
 
DFN-8 to DIP-12 SMT Adapter (1.27 mm pitch, 6.0 x 5.0 mm body)
$0.95
 
$5.99
 
$4.99
There have been no reviews


Gift certificates