You will be redirected to Serial Enabled 16x2 LCD - Red on Black 5V in a few seconds.

Home :: LCDs :: Monochrome :: Serial Enabled 16x2 LCD - Red on Black 5V

Serial Enabled 16x2 LCD - Red on Black 5V

Serial Enabled 16x2 LCD - Red on Black 5V
 
(0 reviews)  

Description: This is the latest evolution of our serial LCD. Included on a single board is a 16×2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.

This LCD makes for a great gift, because it can be used for so many different projects! For more gift ideas check out the SparkFun Gift Guide!

Features:

  • Embedded PIC 16F88 utilizes onboard UART for greater communication accuracy
  • Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
  • Operational Backspace
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off via firmware
  • User definable splash screen

Dimensions:

  • PCB: 103x36mm
  • LCD: 71.4×26.4mm

Documents:

SKU LCD-09394
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 2.79 oz
 
Price: $24.95
Qty Out of stock
: *
: *
: *
 
 
 
Standard Gearmotor - 101 RPM (3-12V)
 
Channel Mount Gearbox Kit - Standard Rotation (3.8:1 Ratio)
 
Pololu 5" Robot Chassis RRC04A Solid Black
$24.95
 
$59.99
 
$7.95
 
 
 
Battery Holder - 2x18650 (wire leads)
 
Stranded Wire: Black, 24 AWG, 60 Feet
 
Short Circuits: Crafting e-Puppets with DIY Electronics
$1.50
 
$4.75
 
$29.95
 
 
 
RFduino - Dev Kit
 
Standoff - Aluminum Threaded (6-32; 3/8", 4 Pack)
 
SparkFun FM Tuner Evaluation Board - Si4703
$42.65
 
$1.29
 
$19.95
There have been no reviews


Gift certificates