You will be redirected to Serial Enabled 16x2 LCD - Black on Green 3.3V in a few seconds.

Home :: LCDs :: Monochrome :: Serial Enabled 16x2 LCD - Black on Green 3.3V

Serial Enabled 16x2 LCD - Black on Green 3.3V

Serial Enabled 16x2 LCD - Black on Green 3.3V
 
(0 reviews)  

Description: The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this product is a black on green 16×2 LCD connected to our serial backpack. The backpack, based around a PIC16LF88, takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.

Communication with SerLCD requires 3.3V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power, ground and RX pins are all broken out to a 3.5mm pitch screw terminal.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the backpack to adjust the contrast.

Note: Though the silkscreen may say '5V', this is a 3.3v Serial LCD. Connect to a 3.3v power source.

Features:

  • PIC 16LF88 utilizes onboard UART for greater communication accuracy
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off  via firmware

Dimensions: 1.425×3.15" – 1" Thick

Documents:

SKU LCD-09066
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 3.02 oz
 
Price: $24.95
Qty Out of stock
: *
: *
: *
 
 
 
LiPower Shield
 
Schottky Diode
 
Rocker Switch - Round w/ Blue LED
$29.95
 
$0.15
 
$1.50
 
 
 
Snap Assortment - 30 pack (male and female)
 
FT231X Breakout
 
TQFP-128 to DIP-128 SMT Adapter (0.5 mm pitch, 14 x 20 mm body)
$2.95
 
$14.95
 
$19.49
 
 
 
QFN-32 (0.65 mm pitch, 7 x 7 mm body) Stainless Steel Stencil
 
Standard Gearmotor - 3 RPM (3-12V)
 
Standard Gearmotor - 4 RPM (3-12V)
$10.99
 
$24.95
 
$24.95
There have been no reviews


Gift certificates