You will be redirected to RFM22B-S2 RF Transceiver Breakout Board in a few seconds.

Home :: Breakout Boards :: RFM22B-S2 RF Transceiver Breakout Board

RFM22B-S2 RF Transceiver Breakout Board

RFM22B-S2 RF Transceiver Breakout Board
 
(0 reviews)  

Description: Here is the breakout board for the RFM22B which gives you access to the pins. The RFM22B is a low-cost ISM (industrial, scientific, and medical) FSK (frequency-shift keying) transceiver module which offers communication at 434MHz and adjustable output power of up to +17 dBm. The wide operating voltage range of 1.8–3.6 V and low current consumption makes the RFM22 an ideal solution for battery powered applications.

Communication with the RFM22B is achieved via a standard 4-wire SPI interface. Three configurable general purpose I/Os are also available, the use of which can be tailored towards the needs of your project. A host of other features are also available including an 8-bit ADC, temperature sensor, RX and TX FIFOs, and low-battery detection. See the datasheet below for a complete description of every register and command.

In our testing, a 17cm wire attached to the 'ANT' pin worked just fine. A hole is drilled next to the 'ANT' pin for strain relief.

Features:

  • Frequency Range = 434 MHz
  • Sensitivity = -118 dBm
  • +17 dBm Max Output Power (Configurable)
  • Low Power Consumption
  • Data Rate = 1 to 128 kbps
  • Power Supply = 1.8 to 3.6 V
  • Ultra low power shutdown mode
  • Digital RSSI
  • Wake-on-radio
  • Auto-frequency calibration (AFC)
  • Configurable packet structure
  • Preamble detector
  • TX and RX 64 byte FIFOs
  • Low battery detector
  • Temperature sensor and 8-bit ADC
  • -40 to +85 °C temperature range
  • Integrated voltage regulators
  • Frequency hopping capability
  • FSK, GFSK, and OOK modulation
  • Low BOM
  • Power-on-reset (POR)

Dimensions: 0.63×0.63in (16x16mm)

Documents:

Replaces: WRL-09821

SKU WRL-10154
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 0.23 oz
 
Price: $22.95
Qty Out of stock
: *
: *
: *
 
 
 
Button Pad 2x2 Top Bezel
 
Analog/Digital MUX Breakout
 
Soldering Tip - Hakko - 3mm Bevel (T18-C3)
$3.95
 
$4.95
 
$7.95
 
 
 
Battery Holder 3xAA with Cover and Switch
 
Getting Started with Netduino
 
QFN-14 (0.5 mm pitch, 3.5 x 3.5 mm body) Stainless Steel Stencil
$1.95
 
$16.95
 
$10.99
 
 
 
QFN-14 to DIP-18 SMT Adapter (0.5 mm pitch, 3.5 x 3.5 mm body, 2 x 2 mm pad)
 
QFN-64 (0.5 mm pitch, 9 x 9 mm body, 3.8 x 3.8 mm pad) Stainless Steel Stencil
 
LilyPad Rainbow LED Panel (5 strips of 7 colors)
$6.99
 
$10.99
 
$24.95
There have been no reviews


Gift certificates