You will be redirected to Pi Tin for the Raspberry Pi in a few seconds.

Home :: Prototyping :: Enclosures :: Pi Tin for the Raspberry Pi

Pi Tin for the Raspberry Pi

Pi Tin for the Raspberry Pi
 
(0 reviews)  

Description: The Raspberry Pi is everybody’s favorite little computer, the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.

The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you’ve gotten your hands on a Raspberry Pi, you’ll want to snag one of these to put it in!

Dimensions: 9.5×6.2×2.7cm

SKU PRT-11623
Stock Out of Stock
Ships No Date Available.
Weight 3.44 oz
 
Price: $9.95
Qty Out of stock
: *
: *
: *
 
 
 
Antenna GPS 3V Magnetic Mount SMA
 
Screw Terminals 5mm Pitch (2-Pin)
 
Microswitch - 3-terminal
$12.95
 
$0.95
 
$1.50
 
 
 
Barometric Pressure Sensor - MPL115A1
 
2mm 10pin XBee Socket - SMD
 
Jumper Wire - 0.1", 5-pin, 6"
$11.95
 
$0.95
 
$1.50
 
 
 
LED - 5mm Cycling RGB (fast)
 
Resistor 1M Ohm 1/4 Watt
 
Making Things See
$0.75
 
$0.19
 
$32.95
There have been no reviews


Gift certificates