You will be redirected to MPU-6050 in a few seconds.


(0 reviews)  

Description: The MPU-6050 is a serious little piece of motion processing tech! By combining a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. The parts’ integrated 9-axis MotionFusion algorithms can even access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.

For precision tracking of both fast and slow motions, the MPU-6050 features a user-programmable gyro full-scale range of ~250, ~500, ~1000, and ~2000 degree/sec (dps) and a user-programmable accelerometer full-scale range of ~2g, ~4g, ~8g, and ~16g.

Dimensions: 4x4x0.9mm QFN


  • Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format
  • Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ~250, ~500, ~1000, and ~2000dps
  • Tri-Axis accelerometer with a programmable full scale range of ~2g, ~4g, ~8g and ~16g
  • Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes
  • Digital Motion Processing (DMP) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
  • Embedded algorithms for run-time bias and compass calibration. No user intervention required
  • Digital-output temperature sensor
  • Digital input on FSYNC pin to support video Electronic Image Stabilization and GPS
  • Programmable interrupt supports gesture recognition, panning, zooming, scrolling, free fall interrupt, high-G interrupt, zero-motion detection, tap detection, and shake detection
  • VDD Supply voltage range of 2.375V-3.46V; VLOGIC at 1.8V~5% or VDD
  • On-chip timing generator with ~1% frequency variation over full temperature range
  • 10,000g shock tolerant


SKU SEN-10937
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 0.01 oz
Price: $19.95
Qty Out of stock
: *
: *
: *
Arduino Wi-Fi Shield
Clamping Hub - 1" Bore (Flat)
Shaft Coupler - 1/4" to 6mm
SparkFun IoT Starter Kit with Blynk Board
Spectacle Motion Kit
Medium Heatsink
LilyPad Sewable Electronics Kit
Transceiver nRF24L01+ Module with RP-SMA
Crystal SMD 24MHz
There have been no reviews

Gift certificates