You will be redirected to MIDI Breakout in a few seconds.

Home :: Breakout Boards :: MIDI Breakout

MIDI Breakout

MIDI Breakout
 
(0 reviews)  

Description: The MIDI Breakout board gives your Arduino or any other microcontroller access to the powerful MIDI communication protocol. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your microcontroller to send and receive MIDI's event messages.

The MIDI Breakout provides both MIDI-IN and MIDI-OUT connections, as well as a MIDI-THRU port. The MIDI-IN port is opto-isolated to prevent ground loops. The MIDI Breakout board can be mounted directly on top of an Arduino like a shield, connecting the MIDI-IN/THRU to the Arduino's hardware RX pin and the MIDI-OUT to TX. All of the Arduino's digital and analog pins, as well as power and ground busses, are broken out as well. The RUN/PGM switch allows you to program the Arduino over serial without having to remove the shield.

Note: The MIDI Breakout does not come with the three through-hole MIDI connectors soldered; these connectors are included with the product, however.

Dimensions: 2.25 x 2.10 " (57.15 x 53.34 mm)

Documents:

SKU BOB-09598
Stock Out of Stock
Ships No Date Available.
Weight 2.16 oz
 
Price: $14.95
Qty Out of stock
: *
: *
: *
 
 
 
Breakout Board for L298N Full-Bridge Motor Driver
 
LS20126 GPS Receiver Breakout
 
BWSN Basics Kit
$2.95
 
$1.95
 
$115.95
 
 
 
Enclosure - Aluminum (120x95x35mm)
 
TVSOP-56 to DIP-56 SMT Adapter (0.4 mm pitch)
 
TSOP-56(II) to DIP-56 SMT Adapter (0.8 mm pitch, 12.7 mm body)
$5.95
 
$9.99
 
$7.99
 
 
 
Servo - Hitec HS-625MG (Standard Size)
 
Stranded Wire: Red, 26 AWG, 70 Feet
 
Channel Slider E (pair)
$31.95
 
$4.95
 
$3.49
There have been no reviews


Gift certificates