You will be redirected to Joystick Shield Kit in a few seconds.

Home :: Arduino :: Shields :: Joystick Shield Kit

Joystick Shield Kit

Joystick Shield Kit
 
(0 reviews)  

Description: The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it's relatively easy and requires minimal tools.

The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

This product is the entire kit and contains the following items:

  • 1x Joystick Shield PCB
  • 4x Momentary Push Button Switch – 12mm Square
  • 1x Thumb Joystick
  • 1x Mini Push Button Switch (breaks out Arduino's reset switch)
  • 2x 6-pin Arduino Stackable Header
  • 2x 8-pin Arduino Stackable Header

Documents:

 

SKU DEV-09760
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 2.31 oz
 
Price: $12.95
Qty Out of stock
: *
: *
: *
 
 
 
Hook-up Wire - Gray
 
Solder Wick #2 5ft. - Generic
 
Soldering Tip - Hakko - 3mm Bevel (T18-C3)
$2.95
 
$2.49
 
$7.95
 
 
 
EL Panel - Blue (10x10cm)
 
Resistor Network - 330 Ohm (6-pin bussed)
 
50 Channel GP-635T GPS Receiver
$14.95
 
$0.50
 
$39.95
 
 
 
SSOP-24 to DIP-24 SMT Adapter (0.65 mm pitch)
 
TVSOP-56 to DIP-56 SMT Adapter (0.4 mm pitch)
 
Micro SMD-10 to DIP-10 SMT Adapter (0.5 mm pitch)
$4.99
 
$9.99
 
$6.99
There have been no reviews


Gift certificates