You will be redirected to GPS Shield in a few seconds.

Home :: Arduino :: Shields :: GPS Shield

GPS Shield

GPS Shield
 
(0 reviews)  

Description: Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield. After that, you will be able to locate your exact position within a few meters. GPS also gives you amazingly accurate time!

A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not included and can be found below in the related items). There is also a spot for the UP501 GPS module. The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1" pitch header, and a small protoyping area is also provided.

The DLINE/UART switch switches the GPS module's input/output between Arduino's standard TX/RX pins or any digital pins on the Arduino (default setting uses pins 3 and 2 connected to TX and RX, respectively). The DLINE/UART switch must be set to DLINE in order to upload code through the Arduino IDE. 

The shield also includes the footprint for a 12mm coin cell battery holder to provide battery backup to the optional EB-85A GPS module.An ON/OFF switch is included which controls power to the GPS module. Additionally, the Arduino reset switch is also brought out.

Note: GPS modules are not included with the GPS Shield, and only the EM-406 connector is populated. Headers are also not installed or included, we recommend the 6 and 8-pin stackable headers.

Features:

  • EM-406 connector populated
  • EM-408 and EB-85A connector footprints provided and connected for optional use
  • UP501 connector and footprint
  • Coin cell battery socket footprint provided and connected for optional battery backup of EB-85A GPS module
  • Standard Arduino sized shield
  • Prototyping area
  • GPS serial and PPS signals broken out to a 0.1" header for additional device connections
  • Arduino reset button
  • DLINE/UART switch controls serial communications
  • ON/OFF switch controls power to GPS module

Documents:

Replaces: GPS-09487

SKU GPS-10710
Stock Out of Stock
Ships No Date Available.
Weight 0.91 oz
 
Price: $14.95
Qty Out of stock
: *
: *
: *
 
 
 
Wheel 42x19mm
 
LED - Basic Green 5mm (25 pack)
 
Black Knob - 15x19mm
$6.95
 
$2.95
 
$0.95
 
 
 
Synapse RF266PC1 - 2.4GHz (chip antenna)
 
Resistor 180 Ohm 1 Watt
 
SSOP-14 (0.65 mm pitch) Stainless Steel Stencil
$30.95
 
$0.75
 
$10.99
 
 
 
QFN-24 to DIP-28 SMT Adapter (0.5 mm pitch, 4 x 4 mm body, 2.1 x 2.1 mm pad)
 
PiFace Digital I/O Expander
 
Muscle Wire - 0.005" Diameter (1 foot)
$8.49
 
$34.95
 
$1.50
There have been no reviews


Gift certificates