You will be redirected to EL Inverter - 12v in a few seconds.

Home :: Components :: EL :: EL Inverter - 12v

EL Inverter - 12v

EL Inverter - 12v
(0 reviews)  


Description: EL inverters allow you to drive EL (electroluminescent) wires. This particular EL inverter accepts a 12 VDC wall adapter. The output is terminated with a JST PH connector, so it plugs directly into the input on the EL Escudo or EL Sequencer board. You can drive EL wires with them directly, but you may need to re-terminate them. There is also a small switch on the side which allows you to switch between 'on', 'off', and 'blink' settings.

Note: These should be good to drive 10-15m worth of EL wire.

(The video states they are 6 foot in length, but they are actually 10 feet in length)


SKU COM-10469
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 12.83 oz
Price: $14.95
Qty Out of stock
: *
: *
: *
SOIC-20 to DIP-20 SMT Adapter (1.27 mm pitch, 300 mil body)
TQFP-64 (0.5 mm pitch, 10 x 10 mm body) Stainless Steel Stencil
7-Segment Red LED
Analog/Digital MUX Breakout
Laser Module - Green
IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL345
Solder - 1/4lb Spool (0.020") Special Blend
Jumper Wire - 0.1", 2-pin, 6"
AttoPilot Voltage and Current Sense Breakout - 45A
There have been no reviews

Gift certificates