You will be redirected to ACS712 Low Current Sensor Breakout in a few seconds.

Home :: Sensors :: Current :: ACS712 Low Current Sensor Breakout

ACS712 Low Current Sensor Breakout

ACS712 Low Current Sensor Breakout
 
(0 reviews)  

Description: This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The ACS712 current sensor measures up to 5A of DC or AC current. We added an opamp gain stage for more sensitive current measurements. By adjusting the gain (from 4.27 to 47) you can measure very small currents.

The ACS712 Low Current Sensor Breakout outputs an analog voltage that varies linearly with sensed current. To calibrate, first set the output offset to the desired level (with zero current on the sense lines, read output with a DVM). Then with a known current input (a 100mA limited supply works well for this), set the output deflection with the gain pot. Sensitivity is then calculated as (Vref – Vdeflect)/(current input).

The bandwidth on the ASC712 Low Current Sensor Breakout has been set to 34Hz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by removing C1. See schematic for more details.

Documents:

SKU SEN-08883
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 0.17 oz
 
Price: $14.95
Qty Out of stock
: *
: *
: *
 
 
 
Solder - 1/4lb Spool (0.032") Special Blend
 
Slide Pot - Motorized (10k Audio Taper)
 
SOIC-48 (1.27 mm pitch) Stainless Steel Stencil
$24.95
 
$19.95
 
$10.99
 
 
 
Micro SMD-4 to DIP-4 SMT Adapter (0.5 mm pitch)
 
QFN-24 to DIP-28 SMT Adapter (0.5 mm pitch, 4 x 5 mm body, 2.65 x 3.65 mm pad)
 
Servo - Hitec HS-85MG (Micro Size)
$2.99
 
$8.49
 
$29.95
 
 
 
Smooth Belt - 1/8"D (1.625" ID)
 
Standard Gearmotor - 168 RPM (3-12V)
 
Channel Mount Gearbox Kit - 360° Rotation (3.8:1 Ratio)
$0.29
 
$24.95
 
$69.99
There have been no reviews


Gift certificates