You will be redirected to Wires with Pre-Crimped Terminals 5-Pack F-F 36" Black in a few seconds.

Home :: Prototyping :: Wire :: Hook-up :: Wires with Pre-Crimped Terminals 5-Pack F-F 36" Black

Wires with Pre-Crimped Terminals 5-Pack F-F 36" Black

Wires with Pre-Crimped Terminals 5-Pack F-F 36" Black
 
(0 reviews)  

These premium wires are stranded 26AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors.

By combining these wires with our crimp connector housings, you can quickly and easily create custom cables with 0.1" (2.54mm) connectors that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!). No soldering is required!

You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other (an example of this is shown in the picture to the right); you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy, as shown in the motor picture below.

The wires are available in four lengths—3" (7.5 cm), 6" (15 cm), 12" (30 cm), 24" (60 cm) - and in ten colors: black, brown, red, orange, yellow, green, blue, purple, gray, and white.

See related items below for housing and other lengths

SKU 2010
Stock 2 In Stock
Ships Today
Weight 2.00 oz
 
Price: $4.95
Qty
Add to wish list
: *
: *
: *
 
 
 
CAN-BUS Shield
 
Serial Enabled LCD Kit
 
RFID Evaluation Shield - 13.56MHz
$44.95
 
$24.95
 
$19.95
 
 
 
6-Pin Chassis Connector - Panel Mount (male and female)
 
16GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
 
SOT-353 to DIP-6 SMT Adapter (0.65 mm pitch)
$2.95
 
$25.95
 
$2.49
 
 
 
DFN-5 to DIP-10 SMT Adapter (0.65 mm pitch, 2.0 x 2.1 mm body)
 
QFN-24 (0.5 mm pitch, 4 x 4 mm body, 2.1 x 2.1 mm pad) Stainless Steel Stencil
 
Shaft - D-Shaft (Stainless; 1/4"D x 1.00"L)
$3.99
 
$10.99
 
$0.99
There have been no reviews


Gift certificates