You will be redirected to USB to TTL Serial Cable in a few seconds.

Home :: Cables :: Serial :: USB to TTL Serial Cable

USB to TTL Serial Cable

 USB to TTL Serial Cable
 
(0 reviews)  

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.

The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Brown), TX (Tan-like/Peach), VCC (Red), and GND (Black). A link to the FTDI drivers can be found in the Documents section below.

Documents:

SKU CAB-12977
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 5.29 oz
 
Price: $9.95
Qty Out of stock
: *
: *
: *
 
 
 
Power Cell - LiPo Charger/Booster
 
7-Segment Serial Display - Kelly Green
 
QFN-16 to DIP-20 SMT Adapter (0.8 mm pitch, 5 x 5 mm body, 2.7 x 2.7 mm pad)
$19.95
 
$12.95
 
$7.49
 
 
 
Bearing Mount - Pillow Block (3/8" Bore)
 
ELastoLite Kit - 2x2 Inch - Orange
 
Hook-Up Wire - Silicone 12AWG (Red, 1M)
$6.49
 
$39.95
 
$4.95
 
 
 
SparkFun OpenSegment Shield
 
Lockitron Mechanical Assembly
 
SparkFun WiFi Shield - ESP8266
$14.95
 
$49.95
 
$14.95
There have been no reviews


Gift certificates