You will be redirected to UDB5 - PIC UAV Development Board in a few seconds.

Home :: GPS :: Eval Boards :: UDB5 - PIC UAV Development Board

UDB5 - PIC UAV Development Board

UDB5 - PIC UAV Development Board
 
(0 reviews)  

Description: Our UAV Development Board is back! The UDB5 (UAV Development Board version 5) comes populated with a dsPIC33FJ256 CPU, and the impressive MPU-6000, a MEMS 3-axis gyroscope and 3-axis accelerometer. The on-board Invensense gyro even has enough vibration tolerance to be used in RC heli applications.

By itself, the board can be used to develop a three axis IMU controller. By addition of an EM406 or D2523T GPS receiver, it can be used to develop a UAV controller for an RC car, plane, helicopter, or boat. It comes with self-testing firmware that can serve as a starting point for you to develop your own control and navigation firmware. There is even fully functional, open source autopilot firmware available.
 
We've made a few changes with the UDB5, we've removed the MMA7361 three axis accelerometer, the dual axis IDG500 gyro, and the single axis ISZ500 gyro and moved to an MPU-6000.  The PCB form factor hasn't changed. If you like, you can add a reset button and/or a 0.2F super cap.
 
Note: For programming, we recommend the PICkit3. Check the related products below.
 
Note: A GPS module is not included. Check the related products below.
 
Features:
  • compatible with 20-channel EM-406A SiRF III GPS
  • compatible with 50-channel GS407 Helical GPS
  • dsPIC33FJ256GP710A Controller (with onboard 3.3V and 5V glue logic)
  • dsPIC runs at 80MHz (40 MIPS) with 8MHz resonator and PLL
  • MPU-6000 MEMS 3-axis gyroscope and 3-axis accelerometer
  • External 256Kbit EEPROM
  • Up to 8 Input, 8 output PWM points
  • 6-wire debug header or ICSP header
  • 4 separate colored status LEDs
  • On board 3.3V and 5V regulators (150mA max)
  • Spare USART connection for debugging, flight logging, wireless telemetry, etc.
  • I/O pins include a CAN, an I2C, and a SPI port
  • 30 spare analog and digital I/O pins for debugging and interfacing to sensors

Documents:

Replaces: GPS-11115

SKU GPS-11703
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 0.91 oz
 
Price: $79.95
Qty Out of stock
: *
: *
: *
 
 
 
RF Link Transmitter - 434MHz
 
Mating connector for Dust Sensor Connector Housing
 
Text to Speech chip for SpeakJet - TTS256
$3.95
 
$1.50
 
$21.95
 
 
 
Serial TFT LCD 4.3" with Touchscreen - uLCD43
 
Audio-Sound Breakout - WTV020SD
 
Geiger Counter
$139.95
 
$19.95
 
$149.95
 
 
 
Encyclopedia of Electronic Components: Volume 1
 
QFN-20 to DIP-24 SMT Adapter (0.5 mm pitch, 4 x 4 mm body, 2.1 x 2.1 mm pad)
 
Stepper Motor - 267 oz.in NEMA23 (200 steps/rev)
$20.95
 
$7.99
 
$29.95
There have been no reviews


Gift certificates