You will be redirected to Teensy Header Kit in a few seconds.

Home :: Prototyping :: Connectors :: Teensy Header Kit

Teensy Header Kit

Teensy Header Kit
(0 reviews)  

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 14-pin, one 5-pin, one 3-pin, and one 2x7 right-angle SMT), enough to connect your chosen Teensy in any configuration you need!

Note: This Header Kit can also be used for the Teensy 3.0 and 3.1, as the pin layout has not changed between the three versions.


  • 2x 14-pin stackable header
  • 1x 5-pin female header (for pins on end)
  • 1x 3-pin header (for 3-off grid holes)
  • 1x 2x7 right-angle SMT header, for the surface mount pads on the back of the Teensy 3.2
SKU PRT-13925
Stock Out of Stock
Ships No Date Available.
Weight 0.40 oz
Price: $1.50
Qty Out of stock
: *
: *
: *
Force Sensitive Resistor - Long
JST SH Jumper 6 Wire Assembly - 8"
Breadboard Power Supply Stick 5V/3.3V
Big Dome Push Button - Yellow
7-Segment Display - 20mm (Red)
Resistor 10 Ohm 1/4 Watt
32GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
SOT23-8 to DIP-8 SMT Adapter (0.65 mm pitch)
QFN-44 to DIP-48 SMT Adapter (0.5 mm pitch, 7 x 7 mm body, 3.3 x 3.3 mm pad)
There have been no reviews

Gift certificates