You will be redirected to SparkFun Sound Detector (with Headers) in a few seconds.

Home :: Sensors :: Sound :: SparkFun Sound Detector (with Headers)

SparkFun Sound Detector (with Headers)

SparkFun Sound Detector (with Headers)
(0 reviews)  

The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound and an analog representation of its amplitude. The three outputs are simultaneous and independent, so you can use as many or as few as you want at once.

The envelope output allows you to easily read amplitude of sound by simply measuring the analog voltage. Gain can be adjusted with a through-hole resistor to change the threshold of the binary (gate) output pin as well. Check the hookup guide below for more information about setting gain.

Each of the three output signals is present on the pre-soldered 0.1" header at the edge of the board. They are active simultaneously. If you aren’t using one in your particular application, simply leave that pin disconnected.

Get Started with the SparkFun Sound Detector Guide


SKU SEN-14262
Stock Out of Stock
Ships No Date Available.
Weight 0.41 oz
Price: $10.64
Qty Out of stock
: *
: *
: *
XBee Pro 900 Wire Antenna
MOSFET Power Controller
QFN-16 (0.8 mm pitch, 5 x 5 mm body) Stainless Steel Stencil
QFN-8 to DIP-12 SMT Adapter (0.65 mm pitch, 3 x 3 mm body, 1.1 x 1.1 mm pad)
Zener Diode - 12V 1W
Triple-Axis Digital-Output Gyro ITG-3200 Breakout
Shaft - Solid (Stainless; 1/2"D x 8"L)
Tube - Aluminum (1"OD x 16"L x 0.82"ID)
Standard Gearmotor - 10 RPM (3-12V)
There have been no reviews

Gift certificates