You will be redirected to SparkFun Capacitive Touch Breakout - AT42QT1011 in a few seconds.

Home :: Sensors :: Capacitive :: SparkFun Capacitive Touch Breakout - AT42QT1011

SparkFun Capacitive Touch Breakout - AT42QT1011

SparkFun Capacitive Touch Breakout - AT42QT1011
 
(0 reviews)  

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun Capacitive Touch Breakout offers a single, momentary capacitive touch button with easy-to-use digital I/O pins.

The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch. As long as a touch (e.g., from a finger) is detected, the AT42QT1011 keeps the output line high. Otherwise, the line is kept low. You just need to provide a power source (1.8V–5V) and ground for the AT42QT1011 to work. Additionally, a PAD pin is available if you would like to create your own external electrode.

Unlike its sibling, the AT42QT1011 does not have an internal time-out, meaning that if you hold your finger to the breakout’s pad for any length of time, it will stay on. The difference between the AT42QT1010 and the AT42QT1011 is small but may be a game changer depending on your project’s uses.

Get Started with the AT42QT101X Capacitive Touch Guide

Documents:

Videos

SKU SEN-14520
Stock Out of Stock
Ships No Date Available.
Weight 0.25 oz
 
Price: $5.95
Qty Out of stock
: *
: *
: *
 
 
 
3.3V step up/boost power supply (DC to DC)
 
4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
 
FT231X Breakout
$10.95
 
$13.95
 
$14.95
 
 
 
LilyPad MP3
 
SuperSOT-8 to DIP-8 SMT Adapter (0.95 mm pitch, 4.0x3.3 mm body)
 
QFN-16 (0.5 mm pitch, 3 x 3 mm body, 1.5 x 1.5 mm pad) Stainless Steel Stencil
$49.95
 
$3.49
 
$10.99
 
 
 
Coin Cell Battery Holder - 20mm (SMD)
 
XBee WiFi Module - RP-SMA Connector
 
Shaft Collar - Clamp (1/4")
$0.95
 
$34.95
 
$2.49
There have been no reviews


Gift certificates