You will be redirected to SHARP Memory Display Breakout - Silver Monochrome (1.3", 96x96) in a few seconds.

Home :: LCDs :: Monochrome :: SHARP Memory Display Breakout - Silver Monochrome (1.3", 96x96)

SHARP Memory Display Breakout - Silver Monochrome (1.3", 96x96)

SHARP Memory Display Breakout - Silver Monochrome (1.3", 96x96)
(0 reviews)  

Our friends over at Adafruit have made this nifty, little breakout using one of SHARP’s silver monochrome memory displays. This little board houses a 1.3", 96x96 screen that performs similarly to an e-paper display with its ultra-low power usage and an LCD with its fast-refresh rates. The SHARP Memory Display does not include a backlight and is readable in daylight but you may need a little assistance reading it in the dark with an external light source.

The display requires to be powered with 3V (with 3V logic), and is placed on an assembled breakout board with a 3V regulator and level shifting circuitry. Meanwhile the current draw depends on refresh rate, so with a 1Hz data refresh rate, its 12uW (4uA @ 3.3V). It should be noted that the display is write only and though it may only need three pins to send data through it also means that the all 96x96 bits (1152 bytes) will need to be buffered by a microcontroller driver like on an Arduino Uno. In doing this you will take up about half of the available RAM on your dev board.


  • 1x SHARP Memory Display Breakout
  • 1x Header Strip - 13x1


SKU LCD-13192
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 3.35 oz
Price: $39.95
Qty Out of stock
: *
: *
: *
DIP Sockets Solder Tail - 14-Pin 0.3"
LilyPad LED Green (5pcs)
Resistor 10K Ohm 1/6th Watt PTH - 20 pack
DC Barrel Jack Plug - Male
Arduino Display Module - 4.3" Touchscreen LCD
LQFP-40 to DIP-40 SMT Adapter (0.65 mm pitch, 7 x 7 mm body)
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack
Invent To Learn: Making, Tinkering, and Engineering in the Class
Machine Screw - Socket Head (6-32 ; 1-1/4"; 25 pack)
There have been no reviews

Gift certificates