You will be redirected to Raspberry Pi - Model B+ Enclosure (Black) in a few seconds.

Home :: Prototyping :: Enclosures :: Raspberry Pi - Model B+ Enclosure (Black)

Raspberry Pi - Model B+ Enclosure (Black)

Raspberry Pi - Model B+ Enclosure (Black)
(0 reviews)  

The Raspberry Pi Model B+ is THE new favorite of development platforms, so the last thing that you'd want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the B+ from things like rogue wires that might short it out while still allowing full access to the board as well as proper airflow to keep your new toy cool! Simply snap the RPi B+ into the bottom half of the enclosure, then snap the two sides together.

The enclosure provides slots to access the GPIO header, USB ports, Ethernet, microSD card, HMDI, 3.5mm jack, and CSI connectors as well as rubber feet and vents to ensure the board gets proper cooling and Pi Camera module mounting holes. All of the status LEDs on the Pi are visible through the case thanks to tunnel recesses embedded in the design and the two piece case can be taken apart without unplugging any cables. This is a really slick case and once you've gotten your hands on a Raspberry Pi, you'll want to snag one of these to put it in!

Note: This case does NOT include a Raspberry Pi Model B+.

Dimensions: 93.4mm x 62.7mm x 31.1mm

SKU DEV-12997
Stock 3 In Stock
Ships Today
Weight 2.80 oz
Price: $8.95
Add to wish list
: *
: *
: *
Jumper Wire - 0.1", 5-pin, 6"
Rocker Switch - Round w/ Blue LED
Smooth Belt - 1/8"D (1.625" ID)
Channel Bracket A
GPS Receiver - EM-506 (48 Channel)
USB LiPoly Charger - Single Cell
Wires with Pre-crimped Terminals 50-Piece Assortment Female-Female 6"
EL Wire - White 3m (Chasing)
Wheel - 65mm (Rubber Tire, Pair)
There have been no reviews

Gift certificates