You will be redirected to RGB LED Panel - 16x32 in a few seconds.

Home :: Components :: LEDs :: Other :: RGB LED Panel - 16x32

RGB LED Panel - 16x32

RGB LED Panel - 16x32
 
(0 reviews)  

Description: Are you looking to add a lot of color to your project? These large 32x16 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32x16 LED matrix, that's 512 LEDs on a 7.5" x 3.75" board. On top of all that, thanks to two IDC connectors, and a seamless frame, these panels can be daisy chained together to form even bigger LED displays. 

These panels require a regulated 3.3-5V supply for power which needs to be able to source a good amount of current – up to 2A in the worst case. Included with each panel is a 0.15" pitch 4-pin polarized connector power cable which is terminated with both a female polarized connector, and a pair of spade terminals. Needless to say, if you are looking for a large, cheap, and easy to use RGB LED matrix you've come to the right place. 

Note: These displays were intended for use with FPGAs and high-speed processors. We've found that 16MHz is about the slowest processor that can drive these adequately. If you want to daisy-chain them together, you will need more speed and more RAM.

Features:

  • 512 RGB LEDs
  • 1/8 Scan Rate
  • Dual IDC Connectors for Daisy Chaining
  • 3.3-5V Supply Voltage

Includes:

  • 1x 32x16 RGB LED Panel
  • 1x 0.15" Pitch 4-pin Power Cable w/ Spade Connectors
  • 2x 16-pin (2x8) Ribbon Cables

Documents:

SKU COM-12583
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 13.76 oz
 
Price: $24.95
Qty Out of stock
: *
: *
: *
 
 
 
SOIC-8 to DIP-8 SMT Adapter (1.27 mm pitch, 300 mil body)
 
TEMT6000 Breakout Board
 
ScreenKey Breakout Board
$3.29
 
$4.95
 
$0.95
 
 
 
Heat Sink Compound
 
Breakout Board for ADMP401 MEMS Microphone
 
Hexapod Chassis Kit
$1.95
 
$9.95
 
$99.95
 
 
 
Open SoftWear - 2nd Edition
 
SOT-363 to DIP-6 SMT Adapter (0.65 mm pitch)
 
SuperSOT-3 to DIP-4 SMT Adapter (0.95 mm pitch, 3.0x1.5 mm body)
$29.95
 
$2.49
 
$2.49
There have been no reviews


Gift certificates