You will be redirected to Pi Tin for the Raspberry Pi - Clear (B+) in a few seconds.

Home :: Prototyping :: Enclosures :: Pi Tin for the Raspberry Pi - Clear (B+)

Pi Tin for the Raspberry Pi - Clear (B+)

Pi Tin for the Raspberry Pi - Clear (B+)
 
(0 reviews)  

The Raspberry Pi B+ is everybody’s favorite little computer, the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi B+ from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.

As you may have noticed, these enclosures are actually transparent. The enclosures are perfect for letting you see your Raspberry Pi B+ and make any needed adjustments easily.

The enclosure provides slots to access the GPIO peripheral header, USB ports, Ethernet, SD card, HMDI, 3.5mm jack, and CSI connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible slots in the design. This is a really slick case and once you’ve gotten your hands on a Raspberry Pi B+, you’ll want to snag one of these to put it in!

Dimensions: 9.5x6.2x2.7cm

SKU PRT-13103
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 4.49 oz
 
Price: $7.95
Qty Out of stock
: *
: *
: *
 
 
 
Standoff - Aluminum Threaded (6-32; 3/4", 4 Pack)
 
GPS Receiver - GP-20U7 (56 Channel)
 
SparkFun weather:bit
$1.79
 
$15.95
 
$14.95
 
 
 
TSSOP-28 (0.65 mm pitch) Stainless Steel Stencil
 
PIC 14 Pin 20MHz 4K 8A/D - 16F688
 
2500 mAh NiMH Battery - AA
$10.99
 
$2.31
 
$2.95
 
 
 
TEMT6000 Breakout Board
 
ATMega328 - TQFP
 
Diffused LED - Yellow 10mm
$4.95
 
$4.25
 
$0.50
There have been no reviews


Gift certificates