You will be redirected to MI:pro Case for micro:bit in a few seconds.

Home :: Prototyping :: Enclosures :: MI:pro Case for micro:bit

MI:pro Case for micro:bit

MI:pro Case for micro:bit
 
(0 reviews)  

The MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.

Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.

Note: The MI:pro case only includes the parts found below. This case does NOT include a micro:bit, power source or mounting screws. These items will need to be purchased separately.

Includes:

  • 1x Front Plate
  • 1x Back Mounting Plate
  • 2x Mid-layer Plate
  • 4x M3 Nylon Machine Screw
  • 4x M3 Nylon Full Nut

Documents:

SKU PRT-14335
Stock Out of Stock
Ships No Date Available.
Weight 2.35 oz
 
Price: $4.95
Qty Out of stock
: *
: *
: *
 
 
 
U.FL SMD Connector
 
Solder Leaded - 100-gram Spool
 
LED - Super Bright White (25 pack)
$1.50
 
$5.95
 
$7.95
 
 
 
Universal Plate Set
 
OBD-II to DB9 Cable
 
EL Wire - Red 3m
$6.95
 
$9.95
 
$9.95
 
 
 
Spider Controller
 
4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
 
TQFP-100 to DIP-100 SMT Adapter (0.4 mm pitch, 12 x 12 mm body)
$49.95
 
$13.95
 
$18.49
There have been no reviews


Gift certificates