You will be redirected to Hakko FX-901 Cordless Soldering Iron in a few seconds.

Home :: Tools :: Soldering :: Hakko FX-901 Cordless Soldering Iron

Hakko FX-901 Cordless Soldering Iron

Hakko FX-901 Cordless Soldering Iron
 
(0 reviews)  

The Hakko FX-901 is a cordless soldering iron that is both portable and practical and provides you with a means to easily solder on the go. Powered by four AA sized batteries, this soldering iron is capable of 60-120hrs of use (depending on battery type) before replacing its power cells. The max temperature for this iron is also determined by the type of battery you use. For instance if you were to use a alkaline battery you would have a higher temperature output of about 600°C (peak) with a much shorter battery life but if you use a nickel-metal hydride type you could only get about 400°C but with a much longer battery life.

For over 50 years, Hakko has been producing superior quality soldering and desoldering tools. They’re dependable, a good value and they work really well! We use Hakko irons in production and we think they’re great.

Note: This iron does NOT include batteries. Check the Recommended Products section below for different options.

Features:

  • North American 120VAC
  • Temperature Range: ~400°-600°C
  • Cartridge type for selectable batteries
  • Approximately 60 minutes with alkaline batteries and 120 minutes with nickel-metal hydride
  • Quick-release soldering tip replacement
  • Ceramic heating element
  • Slender, lightweight ergonomic iron handles
  • Compact design
  • Wide selection of tips available
  • Great for soldering SMD and through-hole applications
  • T11-B cone tip included

Documents:

SKU TOL-13151
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 8.27 oz
 
Price: $34.95
Qty Out of stock
: *
: *
: *
 
 
 
SOT23-6 to DIP-6 SMT Adapter (0.95 mm pitch)
 
Button Pad 2x2 Bottom Bezel
 
Thumb Joystick
$2.49
 
$3.95
 
$3.95
 
 
 
Heat Sink Compound
 
LED - Super Bright Blue (100 pack)
 
Jumper Wire - 0.1", 3-pin, 12"
$1.95
 
$19.95
 
$1.95
 
 
 
16GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy
 
QFN-40 (0.5 mm pitch, 7 x 5 mm body) Stainless Steel Stencil
 
QFN-32 to DIP-36 SMT Adapter (0.4 mm pitch, 4 x 5 mm body, 2.5 x 3.5 mm pad)
$25.95
 
$10.99
 
$9.99
There have been no reviews


Gift certificates