You will be redirected to HS-485HB servo in a few seconds.

Home :: Robotics :: Servos :: HS-485HB servo

HS-485HB servo

HS-485HB servo
 
(0 reviews)  

The HS-485HB servo is one of the best deals going.  HS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With a top ball bearing, heavy duty, high impact Karbonite™ gears and high performance circuitry, the HS-485HB offers lots of torque and features excellent centering and resolution.

Note: The HS-485HB servo spline is slightly oversized and will be a very snug fit into broached servo accessories. After installed the first time, later assembly will be easier.

Detailed Specifications:

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.22sec/60° at no load
Operating Speed (6.0V): 0.18sec/60° at no load
Stall Torque (4.8V): 66.6 oz/in. (4.8kg.cm)
Stall Torque (6.0V): 83.3 oz/in. (6.0kg.cm)

Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 150mA no load operating
Current Drain (6.0V): 8.8mA/idle and 180mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Top Ball Bearing, Lower Bushing
Gear Type: Karbonite Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: See Schematic
Weight: 1.59oz (45g)

SKU KRS-19215
Stock 4 In Stock
Ships Today
Weight 6.00 oz
 
Price: $16.99
Qty
Add to wish list
: *
: *
: *
 
 
 
Arduino Offset Header - 8 Pin
 
Luxeon Rebel Triple-LED Wide Lens
 
LED - RGB Diffused Common Cathode (25 pack)
$1.25
 
$5.95
 
$19.95
 
 
 
Jumper Wire - 0.1", 6-pin, 12"
 
Graphic Equalizer Display Filter - MSGEQ7
 
Quick Disconnect - Male 1/4" (bag of 50)
$1.95
 
$4.95
 
$3.95
 
 
 
TSSOP-20 to DIP-20 SMT Adapter (0.65 mm pitch)
 
TSSOP-56 to DIP-56 SMT Adapter (0.5 mm pitch)
 
TSOP-40 (I) to DIP-40 SMT Adapter (0.5 mm pitch, 16-22 mm body)
$4.49
 
$8.49
 
$7.99
There have been no reviews


Gift certificates