You will be redirected to FemtoBuck LED Driver in a few seconds.

Home :: Components :: LEDs :: Other :: FemtoBuck LED Driver

FemtoBuck LED Driver

FemtoBuck LED Driver
 
(0 reviews)  

This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is based off of the PicoBuck LED Driver, developed in collaboration with Ethan Zonca, except instead of blending three different LEDs on three different channels the FemtoBuck controls just one.

For the FemtoBuck, we’ve increased the voltage ratings on the parts to allow the input voltage to cover the full 36V range of the AL8805 driver. Since the FemtoBuck is a constant current driver, the current drawn from the supply will drop as supply voltage rises. In general, efficiency of the FemtoBuck is around 95%, depending on the input voltage. On board each FemtoBuck you will find two inputs for both power input and dimming control pins and an area to install a 3.5mm screw terminal. Finally at either side of the board you will find small indents or “ears” which will allow you to use a zip tie to secure the wires to the board after soldering them down.

Documents:

SKU COM-12937
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 0.28 oz
 
Price: $7.95
Qty Out of stock
: *
: *
: *
 
 
 
Bluetooth Modem - BlueSMiRF Gold
 
Chain - Delrin (0.25" x 12")
 
Machine Screw - Socket Head (6-32 ; 1/2"; 25 pack)
$64.95
 
$6.99
 
$2.19
 
 
 
Standard Gearmotor - 2 RPM (3-12V)
 
Raspberry Pi Camera Case - Black Plastic
 
Moog Werkstatt-Ø1 Bundle
$24.95
 
$6.95
 
$349.95
 
 
 
Encyclopedia of Electronic Components: Volume 2
 
Big Easy Driver
 
micro:bit Battery Holder - 2xAA (JST-PH)
$24.95
 
$19.95
 
$1.50
There have been no reviews


Gift certificates