You will be redirected to ELastoLite INV135 Inverter in a few seconds.

Home :: Components :: EL :: ELastoLite INV135 Inverter

ELastoLite INV135 Inverter

ELastoLite INV135 Inverter
(0 reviews)  

Description: The INV135 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive 8in2 EL panels and below. The INV135 charges at 3.7V with a 1100mAh current thanks to the mini USB rechargeable Li-Poly battery enclosed in the inverter. All you need to do to start using the INV135 is simply plug in any 4-pin 1mm spaced connector or one of the ELastoLite® over-molded connectors, press a button, and get glowing!

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement. 

Note: Make sure you check out the Hookup Guide below for ELastoLite® tips and how to choose the right inverter. Bigger isn't always better; you should match your inverter to the panels you're driving.


  • 1x USB-A to USB Mini B Cable


SKU COM-11915
Stock Out of Stock
Ships No Date Available.
Weight 4.75 oz
Price: $20.95
Qty Out of stock
: *
: *
: *
Screw Terminals 3.5mm Pitch (2-Pin)
ACS712 Low Current Sensor Breakout
MP3 and MIDI Codec - VS1053B
Jumper Wire - 0.1", 4-pin, 6"
SiGe GN3S Sampler v3
Button Cell Battery - LR44
Enclosure - Aluminum (120x95x35mm)
JLCC-44 to DIP-44 SMT Adapter (50 mils / 1.27 mm pitch)
Shaft - Solid (Stainless; 1/8"D x 1"L)
There have been no reviews

Gift certificates