You will be redirected to ELastoLite INV133 Inverter in a few seconds.

Home :: Components :: EL :: ELastoLite INV133 Inverter

ELastoLite INV133 Inverter

ELastoLite INV133 Inverter
(0 reviews)  

Description: The INV133 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive any EL panel or panels with an area greater than 8in2 (and less than 20in2). The INV133 charges at 3.7V with a 1100mAh current thanks to the mini USB rechargeable Li-Poly battery enclosed in the inverter. All you need to do to start using the INV133 is simply plug in any 4-pin 1mm spaced connector or one of the ELastoLite® over-molded connectors, press a button, and get glowing!

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement. 

Note: Make sure you check out the Hookup Guide below for ELastoLite® tips and instructions.


  • 1x USB A to USB Mini B Cable


SKU COM-11914
Stock Out of Stock
Ships No Date Available.
Weight 6.38 oz
Price: $20.95
Qty Out of stock
: *
: *
: *
USB micro USB SMD Connector
Serial Enabled 16x2 LCD - Red on Black 3.3V
RFID Button - 16mm (125kHz)
Rotary Encoder - Illuminated (RGB)
Making Things Move
TSSOP-14 to DIP-14 SMT Adapter (0.65 mm pitch)
LLP-68 to DIP-68 SMT Adapter (0.5 mm pitch, 10 x 10 mm body)
Momentary Button - Panel Mount (Black)
Tube - Aluminum (1"OD x 6.0"L x 0.82"ID)
There have been no reviews

Gift certificates