You will be redirected to Anemometer Wind Speed Sensor w/Analog Voltage Output in a few seconds.

Home :: Sensors :: Weather :: Anemometer Wind Speed Sensor w/Analog Voltage Output

Anemometer Wind Speed Sensor w/Analog Voltage Output

Anemometer Wind Speed Sensor w/Analog Voltage Output
 
(0 reviews)  

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.

To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind speed). That's it! The sensor is rugged, and easy to mount. The cable can easily disconnect with a few twists and has a weatherproof connector.
 

Details

  • Height (base to center): 105mm / 4.1"
  • Center out to Cup: 102mm / 4"
  • Arm Length: 70mm / 2.8"
  • Weight: 111.8g

Wire Dimensions:
  • Wire Length: 990mm / 39"
  • Plug Length: 30mm / 1.2"
  • Diameter (thickness): 4.8mm / 0.2"
  • Output: 0.4V to 2V
  • Testing Range: 0.5m/s to 50m/s
  • Start wind speed: 0.2 m/s
  • Resolution: 0.1m/s
  • Accuracy: Worst case 1 meter/s
  • Max Wind Speed: 70m/s
SKU ADA19313
Stock Out of Stock
Ships No Date Available.
Weight 48.00 oz
 
Price: $44.95
Qty Out of stock
: *
: *
: *
 
 
 
Antenna GPS Embedded SMA
 
Crystal 20MHz
 
Break Away Male Headers - Right Angle
$11.95
 
$0.95
 
$1.95
 
 
 
Heat Shrink Kit
 
Tilt Sensor - 4-way
 
Jumper Wire - 0.1", 2-pin, 4"
$7.95
 
$2.95
 
$0.95
 
 
 
m3pi Robot with mbed Socket
 
Relay Control PCB
 
Audio Plug - 3.5mm
$149.95
 
$3.95
 
$0.50
There have been no reviews


Gift certificates