You will be redirected to 12V Solenoid Valve - 3/4" in a few seconds.

Home :: Robotics :: Other :: 12V Solenoid Valve - 3/4"

12V Solenoid Valve - 3/4"

12V Solenoid Valve - 3/4"
 
(0 reviews)  

Description: Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.

Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet below for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it's actually 12 VDC. Our 350 GPH pump does not have enough pressure for this valve. A garden hose or other pressurized system should work just fine.

Documents:

SKU ROB-10456
Stock On Backorder
Ships In 1 to 2 weeks.
Weight 9.61 oz
 
Price: $7.95
Qty Out of stock
: *
: *
: *
 
 
 
LED Matrix - Serial Interface - Red/Green/Blue
 
Spring Terminals - PCB Mount (6-Pin)
 
Dual Axis MEMs Gyro - LPR5150AL 1500?/s
$59.95
 
$1.50
 
$7.95
 
 
 
RFID USB Reader
 
Triple Axis Accelerometer Breakout - LIS331
 
XBee 2mW Wire Antenna - Series 2 (ZigBee Mesh)
$24.95
 
$27.95
 
$22.95
 
 
 
Synapse RF266PC1 - 2.4GHz (chip antenna)
 
9 Pin Male Serial Connector - PCB Mount
 
TSSOP-28-Exp-Pad (0.65 mm pitch) Stainless Steel Stencil
$30.95
 
$1.50
 
$10.99
There have been no reviews


Gift certificates